How to do intramuscular injections: Determination of the location of intramuscular injections (+ infographics)

Slimming and injections of vitamins are two effective ways to provide the body with instant recharge and the required additives. Achieving brilliant results in fat burning and muscle building through various fat burning injections often becomes the best motivation to combat the fear of needles. In this the article for educational purposes tells how to make an injection yourself yourself, choose the right zone for injection and other nuances.

Study of the best intramuscular injection sites, training tools and methods of self-injection will become very an inspiring and even stunning experience.

Note: Please have in I’m not a professional medic, and this information is not serves as a reason to ignore your doctor’s advice. You are welcome, consult your physicians before starting any new treatment.

• What is intramuscular (IM) injection?
• Intramuscular injection sites
• Choosing a place for v / m self-injection
• Anatomical landmarks for performing IM injections
• Needle selection for v / m injection – caliber and length
• Injection dose preparation
• Steps for preparing a dose for injection (infographic)
• The procedure for setting a / m injection
• How to make an oil injection (infographics)
• The risks of IM injection

What is intramuscular (IM) injection?

Intramuscular (IM) injection is an injection that delivers medicine directly into the muscles of your blood vessels. With the aim of losing weight intramuscularly The following drugs are introduced:

• Lipo-3 M.I.C.
• Lipo-10 (M.I.C. + vitamin B complex)
• L-carnitine
• A mixture of arginine and carnitine

Some drugs and supplements should only be used in type of oil injections. This is because when introduced to another certain medications, vitamins, and hormones face problems such as delayed suction, leading to acid degeneration, enzyme breakdown and reduction effectiveness. All this does not allow to achieve maximum results. The advantages of IM injections are:

• fast action of drugs
• direct injection of drugs into muscle tissue
• direct form of treatment unlike sublingual, intestinal and skin absorption

Muscle tissue is an ideal site for the introduction of certain medication even compared to subcutaneous injections (right under surface layer of the skin). All thanks to better suction ability and increased blood supply to muscles. Intravenous injections should only be performed by a qualified medical practitioner staff able to find the right vein and also make sure that the drug is safe for injection into a vein. That is why v / m injections are the best option for many who resort to injections fat burners.

Intramuscular injection sites

On the body, there are four main areas for setting IM injections, which are considered the safest and most effective for this procedures. Among them:

• Hip: Lateral broad muscle (m. Vastus lateralis) – at least the degree of digestibility of the drug, introduced in this way, often lower than when setting an injection in the shoulder, this is still the best area for v / m self-injection.
• Buttock: Anterior gluteal region (ventrogluteal muscle) – This is the right place to do IM injections, because here the fat layer is thinner than on the buttocks, which contributes to better absorption of drugs. Also this area is considered the safest in compliance the correctness of the procedure.
• Shoulder: Deltoid muscle (m. Deltoideus) – The most common injection site for multiple vaccines. At setting an injection in this area you need to carefully measure the volume injections, because this area can accommodate a limited number drug at a time. Adults are not recommended to exceed a dosage of 1 ml
• Buttocks: Back gluteal region (dorsogluteal muscle) – Also an acceptable and widely used place for injections. Although this area is significantly removed from the large nerves and blood vessels, there is still a risk of sciatic damage a nerve.

Choosing a place for v / m self-injection

When choosing an area for independent implementation of a / m injection, you need to take into account its availability and the amount of the drug used. The following questions should be answered:

• Do you give a / m injection alone?
• Can you ask someone to give you an i / m injection?
• What dose are you using?

The best place for a v / m self-injection is considered a hip in mind its high availability and good visual control. Also for In this area, you can take a larger needle compared to the shoulder. At skill availability and considerable maneuverability you can independently put an i / m injection in both the thigh and buttock.

For a large dose of medication, it’s better to choose the thigh muscle, since in this zone the threshold of the maximum injection volume is higher. The maximum dose of the drug for the muscles of the buttocks and thigh is 4 ml, while no more than 1 ml can be injected into the shoulder (link). If the required amount of medication exceeds a single dosage for any one zone, you can divide this volume into several injections, and put them in different places. This is highly optional for fat burner injections, because they are mainly recommended prick 1 ml at a time.

It is also worth changing injection areas to avoid skin irritations and scars. Prick you in different places or No, it is advised to allocate a zone with a radius of 2-3 cm for each procedure. It will not be superfluous to record the place and time of the last injection in the muscle. So you can protect your skin from irritation and avoid complications, caused by improper use.

Anatomical landmarks for performing IM injections

• Hip: Divide the thigh surface into three equal parts. The average portion of muscle between the upper thigh and the knee corresponds to the injection zone. Getting ready to insert the needle, lightly lift the muscle over the bone.
• Shoulder: In the upper arm, bones form inverted triangle. The top of the triangle indicates the average axillary line, and its base lies along the acromial line. Make an injection in the center of the resulting triangle 3-5 cm lower acromial line.
• Buttock (front region): Lie on your side side prick up. Put your hand on the buttock junction area muscles with the upper thigh. Extend your palm so that the big the finger pointed to the crotch, and the remaining fingers lay along towards the head. Move your index finger to receive the shape of the letter “V”. Insert the needle into the center of this figure.
• Buttock (back region): Divide the buttock into four equal sections. The upper outer quarter is injection site.

Needle selection for v / m injection – caliber and length

First, you need to know that the syringe consists of three main items:

• Needles: parts of a syringe that pierces the skin and penetrates the muscle (caliber and length will be discussed later)
• Cylinder: tanks for measurement and maintenance drug solution
• Piston: feed control element the drug

The needle should be long enough to penetrate the muscle on desired depth. The two main characteristics of the needle are caliber and length. The gauge corresponds to the diameter of the needle. More than gauge, the smaller the diameter of the needle. For i / m injections are usually used 22-25 gauge needles.

The length of the needle is measured in millimeters (mm) and typically depends on physique of a person. However, the standard needle length for IM injections ranges from 45-70 mm. Be sure to pick up the needle optimal caliber and length for each injection site for prevent any pain that may cause improper needle insertion, tissue damage or irritation.

Injection preparations usually come in a kit with suitable needles. If in doubt, be sure to contact your healthcare provider. to make sure the caliber and length used are correct needles.

Injection dose preparation

When preparing a dose of the drug for administration to the muscle, you need follow a few basic instructions:

• Wash and dry your hands before working with tools for injection
• Do not use used, printed or damaged syringe
• Always adhere to the recommended dosage.
• Do not let the needle touch anything other than the ampoule (bottle) with the drug
• Consult a specialist in case of difficulty on at any stage of the procedure

The following is a general procedure for preparing a dose for injection. Some medicines need pre-dilution, therefore, do not neglect the advice of the medicine manufacturer or your healthcare provider.

The suggested steps for preparing a dose for injection are just an example:

1. Remove the cap from the medicine vial and wipe the rubber cork with alcohol.
2. Check the integrity of the individual syringe packaging. If she open or damaged – discard this syringe and take other.
3. Remove the cap from the syringe and take it as a writing pen pen.
4. Pull the piston toward you, drawing air with a syringe (in volume equal to a single dose of the drug used).
5. Place the medicine vial on a flat surface, stick needle into the center of the rubber stopper, and push the piston, pushing air drawn into the bottle.
6. Without sticking the needle out of the cork, turn the bottle upside down. Make sure the tip of the needle remains immersed in the preparation.
7. Holding the bottle stopper down, pull the piston toward you, filling a syringe with the necessary amount of medication.
8. Holding the needle in the vial, check the syringe for bubbles air by tapping it lightly. Gently press the piston, to remove any trapped air.
9. Recheck the correct dose of the drug in the syringe, and pull the needle out of the bottle. (For example, a prescribed dose may differ from that recommended in the instructions for use medication).
10. Do not place the needle and do not let it touch anyone items before the injection.

Steps for preparing a dose for injection (infographic)

The procedure for setting a / m injection

Regardless of the injection site chosen, there are some general injection tips:

• Always wash your hands thoroughly with soap and dry them.
• Always properly prepare the needle and dose for injections
• Always wipe the injection site with alcohol or other disinfecting solution
• Always ensure that the needle for the injection is under right angle to the injection zone
• If bleeding occurs, pull out the needle and discard it, prepare a new dose
• Gently and slowly, without jerking, insert the needle and the drug, do not push the needle

You can follow these general guidelines for the procedure of intramuscular injection:

1. Select an injection site using anatomical landmarks for the introduction of v / m injections.
2. Wash your hands, treat the injection site with alcohol.
3. Use the instructions to prepare the needle and dose for injection.
4. Stretch the skin at the injection site to reveal muscle, and enter needle at an angle of 90 degrees.
5. Without pulling out the needle, slowly pull the syringe plunger towards you, to make sure that blood vessels have not been affected. In the presence of change the needle and start over, choosing a different location for injections. Otherwise, go to step 6.
6. Continue to slowly drive the drug all the way.
7. Quickly remove the needle and discard it.
8. Briefly press gauze or cotton to the injection site tampon.

How to make an oil injection (infographics)

Disposal of needles and syringes

Needles and syringes must not be disposed of with general household waste. or recycle. They are subject to state law on proper disposal. You can ask in your doctor’s office or purchase a special container for the proper disposal of needles. If necessary, you can use any durable container or plastic bottle with a tight-fitting lid. Be sure to check the current law on proper recycling.

The risks of IM injection

Always consult your healthcare provider before starting. any treatment to rule out any negative effects from your i / m injection. The following risks must be taken into account, associated with a / m injections:

• injection site infection
• skin irritation at the injection site
• tingling and (or) numbness
• allergic reactions
• bleeding
• damage to nerves or blood vessels
• pain in the injection area

The occurrence of any of these side effects gives rise to see a doctor immediately. If you have difficulty breathing, you have swollen lips, mouth or face, then you most likely an allergic reaction to the substance has started, and you should call an ambulance immediately.

Having familiarized with all the nuances of the correct introduction of a / m injection, you can achieve impressive results in losing weight. You can afford to provide your body with everything you need. to stimulate fat burning so that extra pounds melt away eyes.

Consult a doctor before starting procedures.